SAE AMS5627 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr (SAE 51430), Annealed
时间:2024-05-13 02:36:47 来源: 标准资料网 作者:标准资料网 阅读:8766
Product Code:SAE AMS5627
Title:Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr (SAE 51430), Annealed
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.
基本信息
标准名称: | 喷油器总成可靠性考核 评定方法、试验方法、故障分类及判定规则 |
中标分类: |
机械 >>
活塞式内燃机与其他动力设备 >>
燃油供热系统 |
替代情况: | JB/T 51183-1994 |
发布部门: | 国家机械工业局 |
发布日期: | 2000-03-30 |
实施日期: | 2000-10-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
提出单位: | 泵油嘴标准化技术委员会 |
归口单位: | 泵油嘴标准化技术委员会 |
起草单位: | 无锡油泵油嘴研究所 |
起草人: | 张丽敏、朱锡 |
出版日期: | 1900-01-01 |
页数: | 8 页 |
批文号: | 国机管[2000]136 |
适用范围
JB/T 51183-2000 本标准是对JB/T 51183-94《喷油器总成可靠性评定方法、试验方法、故障分类及判定规则》的修订。修订后的标准在计算MTBF和计算MTTFF时有改变。 本标准规定了中、小功率柴油机喷油泵总成可靠性评定方法、台架试验方法、故障分类及判定规则。 本标准适用于中、小功率柴油机喷油器总成可靠性测定和考核评定。 本标准于1991年以JB/TQ 239-91首次发布,于1994年标准号调整为JB/T 51183-94。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 活塞式内燃机与其他动力设备 燃油供热系统
【英文标准名称】:Basicandsafetyprinciplesforman-machineinterface,markingandidentifiation-Identificationofequipmentterminalsandconductorterminations
【原文标准名称】:人机界面、标志和标识的基本原则和安全原则.设备终端和导体终端的识别
【标准号】:IEC60445-2006
【标准状态】:作废
【国别】:国际
【发布日期】:2006-11
【实施或试行日期】:
【发布单位】:国际电工委员会(IX-IEC)
【起草单位】:IEC/TC16
【标准类型】:()
【标准水平】:()
【中文主题词】:字母数字的;胶接;线路图;连接;接触器;定义;导电体;电触点;电气元件;电气工程;电驱动装置;熔断器;识别;识别方法;识别系统;界面;人机;作标记;导体标志;继电器;电阻器;旋转电机;安全装置;终端标志;变压器
【英文主题词】:Alphanumeric;Bonding;Circuitdiagrams;Connections;Contactors;Definitions;Electricconductors;Electriccontacts;Electricalcomponents;Electricalengineering;Electrically-operateddevices;Fuses;Identification;Identificationmethods;Identificationsystem;Interfaces;Man-machine;Marking;Markingsforconductors;Relays;Resistors;Rotatingelectricmachines;Rotatingelectricalmachinery;Safetydevices;Terminalmarkings;Transformers
【摘要】:ThisInternationalStandardappliestotheidentificationandmarkingofterminalsofelectricalequipmentsuchasresistors,fuses,relays,contactors,transformers,rotatingmachinesand,whereverapplicable,tocombinationsofsuchequipment(e.g.assemblies).Italsoappliestotheidentificationofterminationsofcertaindesignatedconductors.Thisstandardfurtherincludesgeneralrulesforanalphanumericsystem.
【中国标准分类号】:A22;K04
【国际标准分类号】:01_075;29_020
【页数】:13P.;A4
【正文语种】:英语